5-50 kg urea coal wheat rice bran screw counting packing machine
The equipment is suitable for various materials with poor fluidity such as organic fertilizer, nutrient soil, briquettes, potatoes, refractory materials, chemical raw materials and the like, and the water content is relatively high and irregular particles.
Action Process: turn on the power switch, start the equipment button, and the material lifting packaging machine silo stops when the silo reaches a certain limit. At this time, the automatic button device on the touch screen is opened, and the packaging bag is placed at the lower opening to touch the start switch cylinder. Work to fix the bag at the discharge port, and the throttle valve is opened (the throttle valve is for the material to fall off when the equipment is stopped). The belt conveyor starts work (the speed of the belt conveyor is divided into three modes: fast, medium and slow). After the set target value is reached, the belt speed will automatically slow down, the feeding amount can be controlled more accurately, but the accuracy of the packaging material can be packaged. The equipment will stop working until the set standard value is stopped, the cylinder opens the packaging bag and the conveyor belt starts. The sealing seal is automatically sealed at the seam sealing machine this process is completed.
1. Display PLC Controller:
1.1 Touch screen operation interface, prompt and intuitive, easy to set weighing control parameters can be input through the button, and there are Chinese help menu prompts, with real-time monitoring and other functions; and password protection can be set.
1.2 The operation panel satisfies the package quantity and the number of packaging times automatically display (the current package weight value and the package count value are displayed at any time, and it is convenient to set the fast and slow input value – the material door switching value), automatic/manual switching, out-of-tolerance alarm, fault self-diagnosis (with fault self-diagnosis function, and can display the fault type by code). At the same time, it can automatically control each set of the number of loadings per scale, no need to manually point bags.
1.3 The weighing PLC should have calibration, automatic tracking of zero point, peeling and other functions. The operator issues commands through the buttons on the weighing control cabinet the function can be determined according to the weighing process status and adjusted by the pumping check calibration (platform scale with indexing value ≤ 50g).
1.4 Power-off Protection: with power-off protection function, after a sudden power failure, the system will automatically save the state, and the material door will return to the initial state, which will not cause material overflow and blockage.
1.5 The data transfer between the weighing control cabinet and the RIO can be done via a serial connection (RS485).
1.6 The processing software includes user dialogs (process and configuration parameters, test and inspection methods, etc.), weighing data control, process monitoring, fault detection and signaling systems.
2. Belt feeding method is divided into fast, medium and slow feeding methods.
3. There are class, Nissan, and cumulative production information automatic storage functions.
4.Equipment material: stainless steel and carbon steel.
5.Bag type: woven bag, polypropylene plastic bag, etc
6.Operating Time: 8000 hours / year
Ambient Temperature: 10-40°C
The electronic control system shall meet the above-mentioned equipment operating in the chain requirements.
7. Gas Source: the buyer is responsible for the gas source.Exhaust Pressure:0.4-0.6Mpa.